Supermicro SSE-F3548S / F3548SR switch screw size
Supermicro SSE-F3548S / F3548SR switch uses M3 / M4 / M5 screws. Details, length ranges and sources below.
Inner rails to the switch chassis use M3 and M4 flat-head screws; a pan-head M3 locks the cable-management holder to the rear post
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
Flat-head M4 screws in the rail kit (kit lists M3 flat x2, M3 pan x4, M4 flat x2, M5 x10)
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Outer rail sleeves/riders and the inner rail lock to the rack posts with M5 screws (ten supplied)
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
Replacement screws for Supermicro SSE-F3548S / F3548SR switch
Affiliate links — they cost you nothing extra and keep this database free.
- Buy on AmazonKits and single sizes, with reviews naming real devices
- Buy on eBayOEM screw sets and repair-parts sellers
- M3 screw assortment kitBoxed kit with several lengths — the cheapest way to cover one thread size
- M3 socket cap screwsISO 4762 / DIN 912 hex-drive, the engineering default
- M3 low profile / button headFor clearance-limited repairs and thin covers
- M3 standoffs & spacersPCB and board-mount hardware in the same thread
- M3 tap & drillFor cutting or chasing a damaged thread
- Precision driver setSmall threads need a properly fitting bit or you cam out and round the head
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →Slug: supermicro-sse-f3548s-f3548sr-switch