MikroTik MTAD-5G-30D3-PA parabolic dish screw size
MikroTik MTAD-5G-30D3-PA parabolic dish uses M4 / M6 screws. Details, length ranges and sources below.
M4 x 12 bolts with serrated washers, qty 4, torque about 2 Nm
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
M6 x 20 feed bracket bolts, qty 8, torque about 5 Nm at the nut
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
Replacement screws for MikroTik MTAD-5G-30D3-PA parabolic dish
Affiliate links — they cost you nothing extra and keep this database free.
- Buy on AmazonKits and single sizes, with reviews naming real devices
- Buy on eBayOEM screw sets and repair-parts sellers
- M4 screw assortment kitBoxed kit with several lengths — the cheapest way to cover one thread size
- M4 socket cap screwsISO 4762 / DIN 912 hex-drive, the engineering default
- M4 low profile / button headFor clearance-limited repairs and thin covers
- M4 standoffs & spacersPCB and board-mount hardware in the same thread
- M4 tap & drillFor cutting or chasing a damaged thread
- Precision driver setSmall threads need a properly fitting bit or you cam out and round the head
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →Slug: mikrotik-mtad-5g-30d3-pa-parabolic-dish