Melco EMC 1 Embroidery Peripheral (textile printing/embroidery machinery) screw size
Melco EMC 1 Embroidery Peripheral (textile printing/embroidery machinery) uses M3 / M4 / M5 screws. Details, length ranges and sources below.
Illustrated parts manual lists M3 x 0.5 pitch machine screws used on control/board mounting hardware
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
Parts manual specifies M4 x 0.7 and M4 x 0.8 pitch fasteners for frame and motor bracket assemblies
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Parts manual lists M5 x 8mm and M5 x 0.8 pitch screws for peripheral head mounting hardware
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
Replacement screws for Melco EMC 1 Embroidery Peripheral (textile printing/embroidery machinery)
Affiliate links — they cost you nothing extra and keep this database free.
- Buy on AmazonKits and single sizes, with reviews naming real devices
- Buy on eBayOEM screw sets and repair-parts sellers
- M3 screw assortment kitBoxed kit with several lengths — the cheapest way to cover one thread size
- M3 socket cap screwsISO 4762 / DIN 912 hex-drive, the engineering default
- M3 low profile / button headFor clearance-limited repairs and thin covers
- M3 standoffs & spacersPCB and board-mount hardware in the same thread
- M3 tap & drillFor cutting or chasing a damaged thread
- Precision driver setSmall threads need a properly fitting bit or you cam out and round the head
More in Industrial & Machinery
Slug: melco-emc-1-embroidery-peripheral-textile-printing-embroidery-machinery