EVoCharge EVSE charging station (EV charging kiosk electronics enclosure) screw size
EVoCharge EVSE charging station (EV charging kiosk electronics enclosure) uses M4 screws. Details, length ranges and sources below.
EVOCHARGE EVSE Manual explicitly lists M4 screws for mounting the internal control board and terminal cover inside the EVSE enclosure
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Replacement screws for EVoCharge EVSE charging station (EV charging kiosk electronics enclosure)
Affiliate links — they cost you nothing extra and keep this database free.
- Buy on AmazonKits and single sizes, with reviews naming real devices
- Buy on eBayOEM screw sets and repair-parts sellers
- M4 screw assortment kitBoxed kit with several lengths — the cheapest way to cover one thread size
- M4 socket cap screwsISO 4762 / DIN 912 hex-drive, the engineering default
- M4 low profile / button headFor clearance-limited repairs and thin covers
- M4 standoffs & spacersPCB and board-mount hardware in the same thread
- M4 tap & drillFor cutting or chasing a damaged thread
- Precision driver setSmall threads need a properly fitting bit or you cam out and round the head
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →Slug: evocharge-evse-charging-station-ev-charging-kiosk-electronics-enclosure