cab Applicator A3200 print-and-apply labeling system (packaging line hardware) screw size

Q: What size screw does cab Applicator A3200 print-and-apply labeling system (packaging line hardware) use?

M2 (M2x20) — Service manual lists M2 x 20mm screws used for small sensor/bracket fixation on the labeling applicator. M3 (M3x4, M3x5, M3x7.5, M3x10, M3x20, M3x25) — Service manual specifies M3 fasteners in multiple lengths (M3x4, M3x5, M3x7.5, M3x10, M3x20, M3x25) for internal assembly, sensor brackets and covers. M4 (M4x6, M4x8, M4x10, M4x14, M4x16, M4x45) — Service manual specifies M4 fasteners in multiple lengths (M4x6, M4x8, M4x10, M4x14, M4x16, M4x45) for pad/vacuum-belt applicator assembly and drive components. M5 (M5x12) — Service manual specifies M5 x 12mm screws for mounting the pneumatic cylinder/applicator arm bracket. M6 (M6x16) — Service manual specifies M6 x 16mm screws for the main frame/column mounting hardware

cab Applicator A3200 print-and-apply labeling system (packaging line hardware) uses M2 / M3 / M4 / M5 / M6 screws. Details, length ranges and sources below.

M2M2x20confirmed

Service manual lists M2 x 20mm screws used for small sensor/bracket fixation on the labeling applicator

pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6

Buy on Amazon Buy on eBay Source

M3M3x4, M3x5, M3x7.5, M3x10, M3x20, M3x25confirmed

Service manual specifies M3 fasteners in multiple lengths (M3x4, M3x5, M3x7.5, M3x10, M3x20, M3x25) for internal assembly, sensor brackets and covers

pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10

Buy on Amazon Buy on eBay Source

M4M4x6, M4x8, M4x10, M4x14, M4x16, M4x45confirmed

Service manual specifies M4 fasteners in multiple lengths (M4x6, M4x8, M4x10, M4x14, M4x16, M4x45) for pad/vacuum-belt applicator assembly and drive components

pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20

Buy on Amazon Buy on eBay Source

M5M5x12confirmed

Service manual specifies M5 x 12mm screws for mounting the pneumatic cylinder/applicator arm bracket

pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25

Buy on Amazon Buy on eBay Source

M6M6x16confirmed

Service manual specifies M6 x 16mm screws for the main frame/column mounting hardware

pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30

Buy on Amazon Buy on eBay Source

Replacement screws for cab Applicator A3200 print-and-apply labeling system (packaging line hardware)

Affiliate links — they cost you nothing extra and keep this database free.

More in Electronics, Racks & Enclosures

19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw 19-inch rack network and AV gear 19-inch rack-mount audio/AV equipment 19-inch server racks 19in / 10in server rack cage nut and screw kit 19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)

Browse all 357 in Electronics, Racks & Enclosures →

Slug: cab-applicator-a3200-print-and-apply-labeling-system-packaging-line-hardware