M2 vs M2.5
They differ by 0.5 mm across the threads — enough that they are never interchangeable, but little enough that they are easy to mix up in a parts tray.
| M2 | M2.5 | |
|---|---|---|
| Thread diameter | 2.00 mm | 2.50 mm |
| Standard pitch | 0.4 mm | 0.45 mm |
| Tap drill | 1.6 mm | 2.05 mm |
| Clearance hole | 2.4 mm | 2.9 mm |
| Cap head Ø | 3.8 mm | 4.5 mm |
| Hex key | 1.5 mm | 2.0 mm |
| Torque into steel | 25-40 N·cm | 45-70 N·cm |
| Into plastic | 12-20 N·cm | 20-35 N·cm |
M2 is normally used for
Laptop bottom covers, SSD brackets, cameras, drones, small enclosures
Everything M2 fits →M2.5 is normally used for
The classic laptop bottom-case screw, hard drive cages, Raspberry Pi mounting holes
Everything M2.5 fits →If you are not sure which one you have
Measure across the outside of the threads with a caliper. A reading within about 0.1 mm of the nominal size is your answer — 2.0 mm means M2, 2.5 mm means M2.5.
Use the screw size finder →Buy either size
Affiliate links — they cost you nothing extra and keep this database free.
M2 screws
Assorted lengths in one box
M2.5 screws
Assorted lengths in one box
Digital caliper
Tells the two sizes apart for certain