M1.2 vs M1.4
They differ by 0.2 mm across the threads — enough that they are never interchangeable, but little enough that they are easy to mix up in a parts tray.
| M1.2 | M1.4 | |
|---|---|---|
| Thread diameter | 1.20 mm | 1.40 mm |
| Standard pitch | 0.25 mm | 0.3 mm |
| Tap drill | 0.95 mm | 1.1 mm |
| Clearance hole | 1.4 mm | 1.6 mm |
| Cap head Ø | 2.3 mm | 2.6 mm |
| Hex key | 1.0 mm | 1.3 mm |
| Torque into steel | 5-8 N·cm | 8-12 N·cm |
| Into plastic | 3-5 N·cm | 4-7 N·cm |
M1.2 is normally used for
Eyeglass hinges, watch cases, hearing aids, handheld game consoles, the very smallest laptop brackets
Everything M1.2 fits →M1.4 is normally used for
Standard eyeglass hinge screw, camera bodies, phone internals, micro drones
Everything M1.4 fits →If you are not sure which one you have
Measure across the outside of the threads with a caliper. A reading within about 0.1 mm of the nominal size is your answer — 1.2 mm means M1.2, 1.4 mm means M1.4.
Use the screw size finder →Buy either size
Affiliate links — they cost you nothing extra and keep this database free.
M1.2 screws
Assorted lengths in one box
M1.4 screws
Assorted lengths in one box
Digital caliper
Tells the two sizes apart for certain