FJD 3D Excavator Guidance System (GNSS/IMU hardware) screw size
FJD 3D Excavator Guidance System (GNSS/IMU hardware) uses M5 / M6 screws. Details, length ranges and sources below.
Hardware installation manual for excavator machine-control system specifies M5x12 screws for mounting the mast/receiver bracket hardware
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
Installation manual specifies M6x14, M6x20, and M6x50 screws for mounting the boom sensor and cab controller brackets on excavators
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
Replacement screws for FJD 3D Excavator Guidance System (GNSS/IMU hardware)
Affiliate links — they cost you nothing extra and keep this database free.
- Buy on AmazonKits and single sizes, with reviews naming real devices
- Buy on eBayOEM screw sets and repair-parts sellers
- M5 screw assortment kitBoxed kit with several lengths — the cheapest way to cover one thread size
- M5 socket cap screwsISO 4762 / DIN 912 hex-drive, the engineering default
- M5 low profile / button headFor clearance-limited repairs and thin covers
- M5 standoffs & spacersPCB and board-mount hardware in the same thread
- M5 tap & drillFor cutting or chasing a damaged thread
- Precision driver setSmall threads need a properly fitting bit or you cam out and round the head
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →Slug: fjd-3d-excavator-guidance-system-gnss-imu-hardware