Dell PowerEdge R7525 screw size
Dell PowerEdge R7525 uses M3 screws. Details, length ranges and sources below.
BOSS S2 card M.2 SSD retention and card module screw (M3 x 0.5)
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
BOSS S2 controller card module and M.2 SSD retention screw securing SSD to BOSS S2 card carrier and Riser 1
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
Replacement screws for Dell PowerEdge R7525
Affiliate links — they cost you nothing extra and keep this database free.
- Buy on AmazonKits and single sizes, with reviews naming real devices
- Buy on eBayOEM screw sets and repair-parts sellers
- M3 screw assortment kitBoxed kit with several lengths — the cheapest way to cover one thread size
- M3 socket cap screwsISO 4762 / DIN 912 hex-drive, the engineering default
- M3 low profile / button headFor clearance-limited repairs and thin covers
- M3 standoffs & spacersPCB and board-mount hardware in the same thread
- M3 tap & drillFor cutting or chasing a damaged thread
- Precision driver setSmall threads need a properly fitting bit or you cam out and round the head
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →Slug: dell-poweredge-r7525